FTZ_Front_nologo_web-compressor

SMARTzynq module is a pluggable System-on-Module (SoM) designed to enable easy integration of Industrial Ethernet Networks in equipment for Electric, Transportation, and Industrial Automation sectors. This powerful module allows the implementation of custom switches or speeding-up end-equipment development with powerful networking capabilities, by using SoC-e IP Cores (even combined with user logic). Network frame processing can be performed by hardware using specific IP Cores.

SMARTzynq module Brochure

SoC–e offers solutions implementable on SMARTzynq for HSR/PRP, low-latency Ethernet, Profinet and Ethernet IP.

SoC–e offers a Development Board (-SMARTzynq Brick– see at bottom) that can be used by the customers to evaluate SoC-e IP Cores or to integrate SMARTzynq in their equipment. This carrier supports copper and fiber optics media.

SMARTzynq module Key Features:

  • Industrial Grade components.
  • Scalable Industrial Grade Xilinx All Programmable SoC: The Zynq family is a processor-centric platforms that offer software, hardware and I/O programmability in a single chip. The multicore processor and industry-leading programmable logic enable better processing systems with fewer and faster devices. Devices supported: XC7Z010 and XC7Z020.
  • 8 Gb DDR3: Fast DDR memory to store operating systems, software applications, protocols stacks or large buffers. None of SoC–e ‘s IP requires external RAM memory.
  • 256 Mb Quad SPI Flash: Memory for firmware and bit stream storage.
  • EEPROM with unique MAC integrated: Ready to use unique MAC in each module to reduce the time-to-market of the customer product.
  • 5x Ethernet Combo Phyters: One 10/100/1000Base-T for configuration and management plus four 10/100/1000Base-T, 1000Base-X or 100Base-FX. The number of PHYs can be reduced according to the customer necessities.
  • Size: 88x60mm.
  • µSD connector: High density and low cost large storage for complex operating systems, permanent data storage and quick upgrade.
  • Temperature Sensor: Each module is provided with an I2C temperature sensor mounted on the PCB.
  • 4x Leds indicator: 1 Power up led, 1 FPGA done led and 2 General purpose LEDs. Also 2x LED for each PHY (link status and activity).
  • Generic GPIOs: Up to 20 GPIOs ready to be used in the carrier.
  • Debug connector: Easy accessible connector on the top of the module that accepts stand-alone powering, JTAG, I2C, SPI and UART.
  • High-reliability board-to-board connectors: Three board-to-board connectors attach SMARTzynq module to the customer carrier.

Ask for a Quotation!

    Comments/Observations

    I've read and accept the Terms & conditions

    "Please check your SPAM folder in case that you don't receive the email."

    SMARTZynq_block
    SMARTzynq_carrier_and_module_2_430_x_264

    SMARTzynq Brick: Ready-to-use SMARTzynq module with SMARTzynq carrier

    The SMARTzynq Brick provides you have a full working solution out of the box. It embeds Linux OS and the IPs and software needed to tun HSR/PRP, Gigabit Ethernet and IEEE 1588 networks. It is a complete solutions for custom switches in the field of HSR/PRP, Managed Ethernet 10/100/100TX-FX, Profinet, IEEE 1588v2 and TSN.

    SMARTzynq Brick consist on the following package:

    • SMARTzynq module
    • SMARTzynq carrier
    • Power Supply
    • USB B cable
    • Fiber/Copper SFP modules (optional)

    To order SMARTzynq family products, please refer to the to our authorized distributors or contact us at info@soce-old.siropeprojects.com.

    SMARTzynq family downloadable information:

    For more information, please contact us at: info@soce-old.siropeprojects.com